Raise the deck without losing level

The Easio 80/130 mm pedestal offers 50 mm of adjustment for raised timber decks. Its self-levelling head absorbs the slope of the base, up to 5%, so there is no need to stack shims and correctors under each pedestal. The tabs on the head guide the joist and make installation easier.

Key benefits

• 50 mm adjustment range
• Self-levelling head for slopes up to 5%
• Joist centring tabs, double joisting possible
• Adjustment by hand or with a drill using the Easio/Cleman bit
• Cladding supports built into the base plate

Usage tips

• Install on stabilised ground, a concrete slab or a protected roof terrace.
• Joists 40 to 80 mm wide, timber or aluminium; not compatible with the Profildeck joist.
• 60 mm Cleman/Easio extension to gain height.
• Pedestrian use, outdoors.

Specifications

• Adjustable height: 80 to 130 mm
• Slope compensated: up to 5%
• Base plate: 192 × 192 mm
• Material: black recycled polypropylene, green nut
• Load: 1 tonne per pedestal; from −30 °C to +60 °C, frost and UV resistant
• DTU 51.4 compliant
• Made in France, 10-year warranty