ORIGIN self-leveling pedestal

The Origin self-leveling pedestal in detail

Its self-leveling head automatically compensates for the incline of the substrate, up to a 5% slope, for a perfectly horizontal slab without checking slab by slab. Laid without glue or grout, a terrace on pedestals stays removable and drains perfectly: water runs off through the joints, air circulates under the slabs and utility ducts pass beneath the surface.

Consider the slab support plate to spread the load under large formats, and the slope corrector if your substrate slopes. See the whole Yeed pedestal range.

Frequently asked questions

Which self-leveling terrace pedestal should you choose?

For a terrace on a sloping or uneven substrate, the YEED self-leveling pedestal (ORIGIN + self-leveling disc) keeps the slab level automatically, with no manual shimming pedestal by pedestal.

My ground is not stable: which pedestal should I choose?

Two reflexes: first stabilize the substrate (compacted gravel on geotextile, or a concrete slab), then choose a self-leveling pedestal that absorbs small irregularities. On ground that moves, preparing the substrate matters more than the choice of pedestal.

Is this pedestal compatible with 20 mm porcelain stoneware slabs?

Yes. This pedestal is sized to take 20 mm ceramic slabs, the standard format for terraces on pedestals, with tabs that ensure an even joint.

How many pedestals should you order?

The number depends on the size of your slabs and the area to cover: one pedestal goes at each corner and is shared by four slabs. Our quantity calculator gives you the total, safety margin included.

Can you adjust the height after installation?

Yes, an adjustment key lets you work through the joint between the slabs, without taking the terrace apart. It is handy for correcting a slight flatness defect afterwards.