A low, level deck, even on a sloping slab

The Easio 40/55 mm pedestal is the lowest in the self-levelling joist range. Placed on a slab or roof terrace with a drainage fall, it keeps the joists perfectly horizontal: its head compensates for slopes up to 5%, with no shim or corrector.

Key benefits

• Self-levelling head: compensates for or creates a slope of up to 5%
• Two 25 mm tabs that centre and hold the joist
• Joists 40 to 80 mm wide, double joisting possible
• Adjustment by hand with the 8-lug nut, or with a drill using the Easio/Cleman bit
• 192 × 192 mm square base plate, perforated so it does not hold water
• Cladding supports built into the base plate

Usage tips

• Install on stabilised ground, a concrete slab or a protected roof terrace.
• Timber or aluminium joists; not compatible with the Profildeck joist.
• The Easio side finishing blocks the self-levelling function: keep it for the edges of the deck.
• At maximum height, add a 10 mm extension to make adjustment easier.
• Pedestrian use, outdoors.

Specifications

• Adjustable height: 40 to 55 mm
• Slope compensated: up to 5%
• Base plate: 192 × 192 mm; head bearing surface: 117 cm²
• Material: black recycled polypropylene, green nut
• Load: 1 tonne per pedestal; from −30 °C to +60 °C, frost and UV resistant
• DTU 51.4 compliant
• Made in France, 10-year warranty