Wood rots, steel dents at the first knock and concrete forces straight lines. To edge a border full of curves, Rouleauflex unrolls over 18 m in one piece and keeps its line for years.

Key features of Rouleauflex

Curves in a single continuous line

The roll naturally follows curves, rounded shapes and changes in level: no intermediate cuts or visible joins, and you go from a curve to a straight line without changing product.

A solid 7 mm wall

Over its full 14 cm height, the edging stays rigid between two anchor points: it does not bow under the pressure of soil or gravel.

100 % recycled, 100 % recyclable

Made from recycled polyolefins, it does not rot, split or mind moisture: no paint, varnish or treatment.

Benefits

• Curves, rounded shapes and level changes in one line
• Firm edge that keeps its line
• Rot-proof, splinter-free
• UV and weather resistant
• Can be sawn and drilled with standard tools
• Durable alternative to wood, concrete or steel

Fixing

Allow one H-profile fixing every 50 cm, i.e. about 37 profiles (4 packs of 10) for an 18 m roll. About 2/3 of the edging height is buried.

Where can Rouleauflex be used?

• Lawn and border edging
• Gravel paths and garden paths
• Flower beds and vegetable patches
• Pond surrounds
• Tree bases

How do you install Rouleauflex?

1. Unroll: unroll the edging flat, ideally in the sun, so it relaxes.
2. Dig: cut a trench about 10 cm deep along the line (2/3 of the height).
3. Position: place the edging in the trench following the line.
4. Anchor: fix it with an H-profile every 50 cm.
5. Backfill: fill in and firm on both sides.

Technical specifications

The colour may vary slightly from one batch to another due to the use of recycled material.

Technical documentation

• Technical data sheet (PDF, French)