CORE Edge steel edging 65 mm - galvanised - 5 m box images
Product shown: CORE Edge steel edging 65 mm - galvanised - 5 m box (65 mm, galvanised). The other heights, finishes and colours of the CORE Edge range are available as separate products.
Edging that sags after two seasons, a curve impossible to get right with a rigid profile, a finish that rusts badly: CORE Edge powered by ECCO solves all that. Its 1.6 mm steel, thicker than average, bends by hand and locks together length after length.
Key features of CORE Edge
Quick installation, no special tools
The edging is driven in with a wooden block and a hammer, then the lengths lock together with the Dual Lock Mechanism™. Each piece covers 1 m effective length: the job progresses fast.
Straights, curves and 90° corners
The flexible steel easily forms straight lines, flowing curves and right angles: one product for the whole garden.
Durable and maintenance-free
Premium weather-resistant finishes (Corten, galvanised or powder-coated), and edging that takes knocks from the mower.
Heights and finishes
- 65 mm: 1.04 kg per length
- 100 mm: 1.42 kg per length
- 150 mm: 2.25 kg per length
Five finishes: Corten steel, galvanised, black (RAL 9005), anthracite (RAL 7016, in 100 mm) and brown (RAL 8028).
Where can CORE Edge be used?
- Lawns and borders
- Paths and patios
- Flower beds and vegetable patches
- Decorative gravel areas
- Separation between paving and planted areas
How do you install CORE Edge?
- Prepare the ground: loosen the soil if it is hard.
- Position the first length: logo facing the visible side, along the cleared edge.
- Drive in: with a hammer, using a wooden block to protect the top edge.
- Connect: fit the next length using the large tab at the top.
- Lock: fold the lower tabs over with pliers: the two lengths are locked together (Dual Lock Mechanism™).
- Anchor (soft ground): insert the clip into the lower opening, engage the stake and drive it down to the clip.
- Finish: repeat to the end of the line.
Technical specifications
| Specification | Value |
|---|---|
| Material | Flexible steel 1.6 mm |
| Total length | 1 075 mm |
| Effective length | 1 000 mm |
| Contents | 5 lengths, i.e. 5 m |
| Heights | 65, 100 or 150 mm |
| Finishes | Corten, galvanised, black RAL 9005, anthracite RAL 7016, brown RAL 8028 |
| Connection | Dual Lock Mechanism™ |
| Anchoring | Anchor stakes with a specific bend |
Frequently asked questions
How do you install CORE Edge in very soft ground?
The stakes go in easily. At regular intervals, slip a flat stone or a piece of brick under the edging so it does not sink, or support it with a small concrete footing just below the top edge.
And in hard ground?
First loosen the soil with a digging fork or pickaxe, drive in the edging with a wooden block, then firm the soil against it.
How do you make a curve?
For a tight curve, bend each length around a cylindrical object (a bucket filled with soil, a round post). For a gentle curve, bend each length slightly by hand and connect them one by one, or connect them first and then drive them in gradually while two people hold the curve.
Technical documentation
- Brand
- ECCO Products
- Reference
- ECCO-10987
- EAN13
- 5060257041312
- Brand
- CORE Edge powered by ECCO
- Range
- CORE Edge
- Material
- Steel 1.6 mm
- Height
- 65 mm
- Color
- Galvanised
- Trafficable
- No
- Sales unit
- Box
- Packaging
- 5 lengths of 1 m effective (5 m)
CORE Edge steel edging 65 mm - galvanised - 5 m box
Garden edging in 1.6 mm flexible steel for straight lines, curves and 90° corners. Dual Lock Mechanism™ connection, dedicated anchor stakes, weather and mower resistant. Box of 5 lengths of 1 m effective length, 3 heights (65, 100, 150 mm) and 5 finishes. This product: 65 mm, galvanised.