Easyfix CS bendable steel edging 100 mm - galvanised - 14.4 m pack images
Product shown: Easyfix CS bendable steel edging 100 mm - galvanised - 14.4 m pack (100 mm, galvanised). The other heights, finishes and colours of the Easyfix CS range are available as separate products.
A flowing curve around a border, an irregular layout, a patio with organic shapes: with rigid profiles, the result is quickly approximate. Easyfix CS (for "Custom Shape") is bent by hand to follow any shape, then simply hammered in.
Key features of Easyfix CS
Bendable into any shape
Straight lines, tight curves and free-form layouts are made on site, with a single product and no corner pieces.
Just a hammer
The sliding pockets can be placed freely along the line, and the long anchor stakes provide a firm hold.
No sharp edges
The rolled top edge means you can walk on it barefoot: safe for children and pets.
Pack contents
6 lengths of 240 cm, 18 pockets and 18 anchor stakes, i.e. 14.4 linear metres. Pockets match the finish (grey or brown).
Finishes
- Corten (1 mm): natural rust patina
- Galvanised (0.8 mm): grey
Where can Easyfix CS be used?
Anywhere without vehicle traffic:
- Patios
- Garden paths
- Borders and flower beds
- Lawns
- Vegetable patches
- Paved areas
How do you install Easyfix CS?
- Mark out: draw the line, straight or curved.
- Shape and drive in: bend the edging to the required shape and hammer it in.
- Place the pockets: slide them to the anchoring points needed.
- Anchor: drive the stakes through the pockets.
- Finish: complete the surfaces on either side.
Technical specifications
| Specification | Value |
|---|---|
| Material | Galvanised steel 0.8 mm or Corten 1 mm |
| Length of one edging piece | 240 cm |
| Heights | 100 mm or 150 mm |
| Anchor stakes | 34 cm |
| Contents | 6 lengths, 18 pockets, 18 stakes |
| Length per pack | 14,4 m |
| Top edge | Rolled, no sharp edges |
| Drivable | No |
Frequently asked questions
How do you cut Easyfix and make a corner?
Cut with an angle grinder. For a 90° corner, grind away the rolled edges where the bend will be, then bend the edging by hand.
Technical documentation
- Brand
- ECCO Products
- Reference
- ECCO-10755
- EAN13
- 2000000002613
- Brand
- ECCO Products
- Range
- Easyfix CS
- Material
- Galvanised steel 0.8 mm
- Height
- 100 mm
- Color
- Galvanised
- Trafficable
- No
- Sales unit
- Pack
- Packaging
- 6 edgings 240 cm + 18 pockets + 18 stakes (14.4 m)
Easyfix CS bendable steel edging 100 mm - galvanised - 14.4 m pack
Highly bendable steel garden edging for tight curves and free-form layouts. Hammer-in installation, anchored with sliding pockets and 34 cm stakes, rolled top edge with no sharp edges. Pack of 6 lengths of 2.40 m (14.4 m), in galvanised or Corten, height 10 or 15 cm. This product: 100 mm, galvanised.