Easyfix LI steel edging 100 mm - galvanised - 14.4 m pack images
Product shown: Easyfix LI steel edging 100 mm - galvanised - 14.4 m pack (100 mm, galvanised). The other heights, finishes and colours of the Easyfix LI range are available as separate products.
A lawn that needs to finish neatly against a path, a patio to be edged in a perfectly straight line: Easyfix LI (for "linear") draws clean lines with no visible joins or sharp edges to deal with. It is simply hammered in and also follows gentle curves.
Key features of Easyfix LI
Straight lines, gentle curves and right angles
One product for the whole layout, with no separate corner pieces: ideal for edging lawns, paths and patios.
Hammer-in installation
The edging is driven straight into the ground. The sliding pockets can be placed freely along the line and the 34 cm anchor stakes, highly impact-resistant, provide a firm fixing.
Safe for the whole family
The rolled top edge has no sharp edges: you can walk on it barefoot, safe for children and pets. Once installed, the fixings are almost invisible.
Pack contents
6 lengths of 240 cm, 18 sliding pockets and 18 anchor stakes, i.e. 14.4 linear metres of edging. The pockets match the finish (grey or brown).
Finishes
- Galvanised (0.8 mm): grey, neutral and long-lasting
- Corten (1 mm): natural rust patina
- Black powder-coated RAL 9005
Where can Easyfix LI be used?
Anywhere without vehicle traffic:
- Patios
- Garden paths
- Borders and flower beds
- Lawns
- Vegetable patches
- Paved areas
How do you install Easyfix LI?
- Mark out: define the line of the edging.
- Drive in: position the edging and hammer it in to the required height.
- Place the pockets: slide them to wherever you want extra anchoring.
- Anchor: drive the stakes through the pockets.
- Finish: complete the surfaces on either side.
Technical specifications
| Specification | Value |
|---|---|
| Material | Galvanised steel 0.8 mm, Corten 1 mm or black powder-coated RAL 9005 |
| Length of one edging piece | 240 cm |
| Heights | 100 mm or 150 mm |
| Anchor stakes | 34 cm |
| Contents | 6 lengths, 18 pockets, 18 stakes |
| Length per pack | 14,4 m |
| Top edge | Rolled, no sharp edges |
| Drivable | No |
Frequently asked questions
How do you cut Easyfix and make a corner?
Cut with an angle grinder fitted with a cutting disc. For a 90° corner, grind away the rolled top and bottom edges where the bend will be, then bend the edging by hand around a post or a sturdy table leg.
Can Easyfix LI make a tight curve?
No: for pronounced curves or free-form shapes, choose Easyfix CS, designed to be bent into any shape. Forcing Easyfix LI may leave an unsightly kink.
Technical documentation
- Brand
- ECCO Products
- Reference
- ECCO-10711
- EAN13
- 2000000002552
- Brand
- ECCO Products
- Range
- Easyfix LI
- Material
- Galvanised steel 0.8 mm
- Height
- 100 mm
- Color
- Galvanised
- Trafficable
- No
- Sales unit
- Pack
- Packaging
- 6 edgings 240 cm + 18 pockets + 18 stakes (14.4 m)
Easyfix LI steel edging 100 mm - galvanised - 14.4 m pack
Steel garden edging for straight lines, gentle curves and right angles. It is hammered in and fixed with sliding pockets and long anchor stakes. Rolled top edge, no sharp edges. Pack of 6 lengths of 2.40 m (14.4 m), in galvanised, Corten or black, height 10 or 15 cm. This product: 100 mm, galvanised.