This pack combines in a single product the Jouplast ESSENTIEL 140/230 mm adjustable paving pedestal and the acoustic rubber pad that sits on its head. You order one line instead of two: the number of pads always matches your number of pedestals exactly, with nothing forgotten at the end of the layout.

This range covers clearly raised terraces. With 60 mm extensions fitted, it can go well beyond 230 mm; above 200 mm, a denser layout and careful perimeter stability remain essential.

What the acoustic rubber pad changes

Laid directly on the pedestal head, a porcelain stoneware slab clatters underfoot and transmits vibration into the structure. The acoustic rubber pad sits between the head and the surface to decouple the two. It dampens impact noise, spreads the bearing under the corner of the slab and holds it in place during adjustment. It adds 3 mm to the finished height, to be included in the build-up calculation.

It is most useful on upper-floor terraces, on roof terraces and with large-format tiles, where clatter is most noticeable.

Precise adjustment with the adjustment ring, before laying the surface

The height is set by screwing or unscrewing the base, so you can prepare a perfectly level laying plane before installing the slabs. Setting out is done by hand, with no special tools.

Compatible with all your terrace surfaces

The pedestal takes concrete slabs, porcelain stoneware and 2 cm outdoor tiles, as well as duckboards, without joints or glue. The 3 mm spacer tabs built into the head ensure an even joint between each slab. The terrace stays ventilated, removable and accessible at all times.

How many do you need?

Allow 1 pedestal at each slab corner, i.e. 4 pedestals per slab in a straight layout. For formats from 60 x 60 cm, add a central pedestal by breaking off the spacer tabs. As the pack contains one pad per pedestal, the quantity ordered matches your pedestal count directly.

Technical specifications